Slitting Roll Sleeves

Alcon Slitting Roll Sleeves are made from high carbon, chrome alloy steel, which hardens completely through the sections normally required for this service.

63-64 RC hardness is guaranteed. Repeated grinding will not expose soft areas, as is the case on sleeves which have been carburized or case hardened.

The bores and OD's of these sleeves are concentric within .001 total indicator reading.
The ends are ground square with the axis.


1) Give Alcon Tool # from table
2) OR specify dimensions A, B, C, T

Special sizes quoted upon request.
Standard sleeves always in stock.

Get the Alcon Advantage

Catalog Index

Contact Us